PAVING JOINTING COMPOUND
Since the start of the 2011 season, the Midlands based Barton Fields Patio and Garden Centre have introduced a new paving jointing compound into their range. Twelve months on, the number of landscaping companies starting to use the paving jointing product continues to rise. Whether you are trade or DIY, pointing your patio has never been so easy.
Says Karl Cooper of KC Landscaping
‘EasyJoint has been the best compound I have ever used. I have tried several products over the last 5 years but this is the best I have come across and shall continue to use. No longer do I have to wait for fine weather in order to get the patio completed and get paid’
Cost per tub £29.99 inc vat (collected from the Burton on Trent centre)
Delivery nation-wide available
Please contact us for bulk pricing and nation-wide delivery pricing - 01283 711288
A revolution in the world of paving jointing methods
Extensively used throughout Northern Europe, EASYJoint brings a whole new dimension to paving jointing in the UK. This is a totally unique product with numerous advantages over the alternatives on the market.
Rain or Shine - it goes in fine!
No longer do you have to wait for a break in the weather. EASYJoint is so versatile that it can be applied in virtually any weather condition imaginable. So, no matter if it is scorching hot, or a wet and cold winters day, you can get on with the job. And what's more, you don't have to protect your work from rain or frost after you've applied it!
Up to 20 times faster to use than convetional methods of jointing.
Opened but un-used product can be stored for later use
(subject to conditions)
What colours does it come in?
EASYJoint is offered in a wider range of colours than any other compound on the market.
The three standard colours are Buff Sand, Stone Grey and Basalt.
At Barton Fields, we stock Mushroom & Grey
It's so EASY to use, we called it EASYJoint
It really is so simple to use that we truly believe it to be foolproof. It comes with detailed instructions but the basics are so easy they are hardly necessary! To quickly review how to use the product, please read below:-
Brief Instructions for Use
1.Thoroughly wet the surface area to be jointed. The wetter the better! Don't worry about water settling in the joints.
2.Open the tub and remove the inner vacuum bag. Cut open and pour about half over the surface to be jointed.
3.Sweep into the joints with a broom or squeegee.
4.Using a hose on a "fan" or "fine spray" setting, flush the compound into the joints to ensure it fully settles to the bottom.
5.Top up any sagging joints with more EASYJoint.
6.Flush again to ensure the joints are fully filled (topping up again if necessary).
7.Apply a final fine spray to the paving to clear away any final traces of compound and allow to dry.
8.Optional - for a better looking joint, once the water has drained away and the surface of the paving is starting to dry, run a jointing trowel or iron over the joints to smooth the surface.
1 x 12.5Kg Tub of Easy Joint will cover approximately the following areas*
The following is based on the slab size in mm and a joint width of 30mm deep x 8mm wide
600x600 - 8.5m2
600x450 - 7.0m2
450x450 - 6.0m2
600x300 - 5.5m2
450x300 - 5.0m2
300x300 - 4.0m2
* THIS IS A GUIDE ONLY. Because accuracy of gap width and depth cannot be uniformly guaranteed, the above info is only a reasonable estimate of the amount of material required.
See the following video demonstration to help you appreciate the application of the paving jointing compound:-